The Air slide table cylinders are particularly useful in applications involving transport and positioning and in limited space applications. It incorporates a highly rigid linear guide, which generates increased allowable momentum of up to 240% and makes it suitable for use in applications where the workpiece is a long-distance away. Flexible and lightweight, these series cylinders are available in bores from 6 to 20mm with the ability to be mounted in four directions and piped in three directions. Extremely accurate, due to its high traveling parallelism.
Certain Air Slide cylinders are ideal for applications that require high precision movement in short travel situations. The precision slide table has a machined guide with very tight tolerances that operate in conjunction with highly accurate re-circulating ball bearings. This slide is capable of achieving parallelism within 0.02mm and non-rotation accuracy as low as 0.03 degrees. Two of the mounting surfaces allow work to be held to a tolerance of +/-0.05mm plus the tolerance of the workpiece. The slide contains two pistons that operate independently to supply the movement of the actuator.